164 products

Showing 126–150 of 164 results

  • ZX601+ ZYYX Classic Filament Monitor Addition Kit (Monitor+Cable Assembly)

    Filament Monitor Addition Kit for ZYYX Classic (Monitor+Cable Assembly). New imp..

    $ 88,48 excl. VAT

  • ZX603 ZYYX SoftSpring™ Accessory

    ZX603 ZYYX Softspring kit

    The ZYYX SoftSpring is an accessory for use when you are printing with softer ma..

    $ 17,69 excl. VAT

  • ZX604 Standard Spring for non-flex materials

    Standard spring for the filament tension arm of most ZYYX printers. This is the ..

    $ 5,89 excl. VAT

  • ZX605 ZYYX Pro Maintenance Kit™

    ZYYX Maintenance Kit™ Pro

    This is a perfect way to keep you printers performance at a top level. The ZYYX ..

    $ 58,39 excl. VAT

  • ZX606DIY ZYYX Connect™ (network port upgrade)

    Upgrade your ZYYX printer with the ZYYX Connect™ network module. This allows y..

    $ 348,02 excl. VAT

  • ZX607DIY ZYYX Connect™ Camera Add-on

    Upgrade your ZYYX Connect™ with the ZYYX Connect camera module. This allows yo..

    $ 106,17 excl. VAT

  • ZX608DIY ZYYX Connect+ (network port with camera upgrade)

    Upgrade your ZYYX printer with the ZYYX Connect network module with camera. This..

    $ 442,40 excl. VAT

  • ZX609DIY Trinamic TMS2209 stepper driver upgrade (xyz drivers + instruction)

    The stepper motors in a 3D printer are controlled by a stepper motor drive board..

    $ 152,18 excl. VAT

  • ZX609DIY1 Trinamic TMS2209 stepper driver spare part (x/y/z/e driver + instruction)

    The stepper motors in a 3D printer are controlled by a stepper motor driver boar..

    $ 53,67 excl. VAT

  • ZX609DIY4 Trinamic TMS2209 stepper driver upgrade (xyze drivers + instruction)

    The stepper motors in a 3D printer are controlled by a stepper motor drive board..

    $ 199,37 excl. VAT

  • ZX610 ZYYX Bondtech extruder upgrade for ZYYX+/Classic

    This is an upgrade for the ZYYX+ and ZYYX Classic extruder with optimised extrud..

    $ 348,02 excl. VAT

  • ZX611 ZYYX Bondtech extruder upgrade for ZYYX Pro with gear ratio

    This is an upgrade for the ZYYX Pro extruder with optimised extruder performance..

    $ 465,99 excl. VAT

  • ZX612 Upgraded internal filament support with ball bearings for ZYYX Pro

    Upgraded filament spool support for use inside the ZYYX Pro. This upgrade incorp..

    $ 46,00 excl. VAT

  • ZX614 Endstop switch board standard

    Endstop switch board standard for all ZYYX 3D printers. Connects to the motherb..

    $ 7,07 excl. VAT

  • ZX615 Endstop switch board with clamp

    Endstop switch board (standard size) for all ZYYX 3D printers with reinforcement..

    $ 13,56 excl. VAT

  • ZX616 ZYYX Al Side Wagon Improved Belt Lock Kit

    This kit contains everything to replace the original side wagon belt tension fas..

    $ 20,64 excl. VAT

  • ZX617 ZYYX Pro X/Y EPDM timing belt kit

    Set of precut high-temperature EPDM belts for the ZYYX Pro. 1 open for X 2 ope..

    $ 34,80 excl. VAT

  • ZX618 External filament stand with ball bearings (for standard spools)

    Upgraded filament spool support for use outside the 3D printer. This improved st..

    $ 58,39 excl. VAT

  • ZX619 External filament stand with ball bearings (for large spools)

    Filament spool support for use outside the 3D printer. This larger stand incorpo..

    $ 76,09 excl. VAT

  • ZX621 ZYYX Basic Maintenance Kit™

    This is a perfect way to keep you printers performance at a top level. The ZYYX ..

    $ 46,59 excl. VAT

  • ZX622 ZYYX Pro II Maintenance Kit™

    This is a perfect way to keep your printer performance at a top level. The ZYYX ..

    $ 70,19 excl. VAT

  • ZX702 SwiftTool™ Multi0.2, brass nozzle, Ø0.2 mm

    One SwiftTool Multi0.2 for use with non-abrasive filaments like PLA, ABS, ASA, o..

    $ 152,77 excl. VAT

  • ZX702S SwiftTool™ Multi0.2, brass nozzle w Silicone shell, Ø0.2 mm

    One SwiftTool Multi0.2 for use with non-abrasive filaments like PLA, ABS, ASA, o..

    $ 199,96 excl. VAT

  • ZX704 SwiftTool™ Multi0.4, brass nozzle, Ø0.4 mm

    One standard SwiftTool Multi0.4 for use with non-abrasive filaments like PLA, AB..

    $ 152,77 excl. VAT

  • ZX704S SwiftTool™ Multi0.4, brass nozzle w Silicone shell, Ø0.4 mm

    Sold out!

    One SwiftTool Multi0.4 for use with non-abrasive filaments like PLA, ABS, ASA, o..

    $ 223,56 excl. VAT
Shopping cart
Your cart is empty
Products: 0
Total: $ 0,00