ZP2M+C skrivbord+
previous arrow
next arrow
ZP2M+C skrivbord+
previous arrow
next arrow

– A Carbon fiber, Metal & Ceramic master

The ZYYX Pro II MC is an exceptionally quiet industrial-grade 3D printer for tools, high-temp functional prototypes, and high-strength parts.

It has a closed design and clean room class air filtering system, perfectly suited for every engineering office, tool shop, research facility, or workshop.

The ZYYX Pro II MC is developed to be:

  • Robust and reliable
  • Clean-air safe and fume-free
  • Quiet by design
  • Easy to use with a MagFlex™ build-plate system
  • Compatible with Metal & Ceramic materials
  • Compatible with Engineering and Standard Grade Polymer materials
  • Protective of material quality and strength even during storage
  • Accessible on-line for control or monitoring
  • Sustainably delivering professional print quality


OfficeSafe Ultra™ – Clean and Fume-free Air

Workplace health is of highest priority and the ZYYX Pro II is designed to be perfectly safe for the office desktop. Our new filtering system, a Swedish-made combined HEPA H13 and active carbon filter, removes more than 99.95% of the ultrafine particles, volatile organic compounds, and odors that are created in the air from melting polymers. This innovative, 95 mm thick filter of clean-room class is so efficient that it even cleans the air of the room.

Below to the right you can see a graph of the amount of particles inside and outside of the printer when printing ABS. This measurement was done with a prototype filter that absorbs somewhat less (~99 %) of the particles.


OfficeSafe Whisper™ – Quiet by Design

While designing ZYYX Pro II we tested dozens of power-supplies. They were all found to be noisy, often due to cooling fans suddenly flipping on and off or small whining fans. So, we decided to do our own cooling solution together with a 500 W passive power-supply. That made a huge difference. The ZYYX Pro II PSU is virtually silent.

For filters and cooling we used large fans from Noctua and Arctic, famous for their low-noise design in the gaming PC area. The result is a whisper level 3D printer with a 38 dB(A) sound level while printing with all heating functions active.


The ZYYX MagFlex™ Build-Plate – Easy to Use

The ZYYX MagFlex™ spring steel build-plates make removal of prints easy to do by hand. The 3D printer bottom glass platform, adapted with steering pins for easy positioning of the build-plate, is covered with a magnetic layer. Due to the steering pins, the build-plate is swiftly positioned accurately on the glass platform and attaches firmly by magnetic force.

After printing, the build-plate is lifted from the glass base after which the print is removed from the build-plate by bending the plate. The build-plates are available with three different top layers adopted for different print materials.

Below you can see a demo video.

proTect™ – Protective and Reliable

The ZYYX Pro II MC comes with the proTect™ system that has been developed to maximize filament durability during storage. The filament is kept in a resealable vacuum bag with a dehumidifier capsule. Vacuum is accomplished with an electrical vacuum pump (included). The dehumidifier capsule changes color if it is exposed to moisture, signaling if extra drying of the filament is needed before use which avoids failed prints and saves time and material. During printing, the filament is taken out of the bag and kept dry inside the heated print chamber.


Other ZYYX Pro II MC Features

Robust Design

  • All-metal structural design giving stability and quality for prints
  • Thick and stable aluminum top plate with linear rails
  • Heat insulated cover and see-through service top door
  • Hood for feeding of sensitive Metal & Ceramic filaments.
  • OLED screen with high contrast and readability

Controlled printing environment

  • Heated chamber – provides a consitent printing environment tuned to the chosen material, securing layer adhesion and preventing warp. A heated chamber is necessary for some high-strength engineering grade materials
  • Chamber temperature up to 75 °C. Heats chamber to 65 °C in 5 minutes
  • Automatic Leveling – auto-calibrates the distance between the nozzle and build-plate for every print, compensating for any tilting of the build-plate
  • Material Monitor – auto-pauses the print during filament run-out or tangling

Unique extrution system

  • Dual-sided large gear extruder (Bondtech LGX) with support for high-temp printing
  • Supports SwiftTool24™ – quickest system for nozzle change on the market, up to 275 °C

Versatile software use

  • Simplify3D, the market leading software, is included
  • Open-material system – No limitations, you decide
  • Off-grid or Online – Your choice
    • CyberSafe – can be used stand-alone – no computer/internet needed during printing
    • Remote access Ethernet module with optional camera
  • Enhanced profiles showing user settings before start which minimizes the risk for defective prints

ZYYX Pro II MC Technical Specification

Print technology Fused Filament Fabrication (FFF)
Product weight 25.5 kg
Product size (BWD, mm) 441 x 465 (710 incl. MC hood) x 457 mm (536 incl. filter)
Build volume 285 x 235 x 210 mm
Printing (extruder) temperature 100 – 275 °C
Chamber temperature Room temp to 75 °C. Heats chamber to 65 °C in 5 minutes

Stepper motor Type 1.8° step angle, 1/256 micro stepping using silent Trinamic TMC2209 stepper drivers
Max resolution 50 µm layer thickness, 11 µm XY positioning
Speed Up to 200 mm/s print speed
Build-plate MagFlex™ Glass build-plate with removable magnetic spring sheet and ZYYX 3D print-sheet top layers (Pro TL, Multi-Material TL, Perforated TL)
Extruder Dual-sided large gear extruder (Bondtech LGX) with support for high-temp printing
Nozzle system for basic materials SwiftTool24™ Multi 0.2 mm
Nozzle system for M&C, abrasive, and basic materials SwiftTool24™ Carbon 0.4, 0.6, 1.2 mm
Filament diameter 1.75 mm
Metal & Ceramic filament materials used with MagFlex™ Multi-Material TL Porcelain, Alumina, Zirconia (B/W), Silicon Carbide, H13 steel, 316L steel. More to come
Filament materials used with the MagFlex™ PA TL ZYYX proNylon, ZYYX proCarbon, ZYYX proGlass
Filament materials used with MagFlex™ Multi-Material TL ZYYX PLA, ZYYX Flex, ZYYX PETG, ZYYX PETG-CF, many third party filaments
Filament materials used with MagFlex™ Perforated TL ZYYX ASA, ZYYX ABS, third party filaments with significant shrinkage

Interfaces SD Card, USB for firmware updates, Ethernet
Firmware Custom Sailfish Open Source
Network Web interface with optional camera
Desktop Software Simplify3D
Minimum computer requirements (for data preparation) Intel Pentium 4 or higher processor, 4 GB of RAM, Windows 7 or later (32- or 64-bit), MacOS X 10.7 or later, Ubuntu Linux 14.04 LTS or later. OpenGL 2.0 capable system, Internet connection
Recommended computer requirements Intel Core i7 or better CPU, 8 GB or more of RAM
Supported import file types STL, X3G, 3MF

ZYYX Pro II MC Metal & Ceramic Materials

The ZYYX user can choose from a line of carefully selected high-quality Metal & Ceramic filaments that comes with associated plug-and-play filament profiles. This allows the professional user to concentrate on their creations, rather than tweaking print parameters.
Check out this page for an overview of all Metal & Ceramic materials.

Ceramics for ZYYX Pro II MC

Zetamix Porcelain

Porcelain is a technically advanced material of timeless elegance and exceptional durability. It is designed to withstand heat and thermal shocks, making it ideal for everyday objects that require both style and durability. Whether for decorative pieces or practical items, porcelain adds an exceptional touch of elegance, making it suitable for a wide range of artistic and functional applications. The surface can also be enamaled (glaced) for increased surface eastetics.

Zetamix Alumina

Alumina is widely used in the ceramic field, alumina is a wear resistant material. Alumina can resist extreme temperature and it used to produce parts like a burners, venturi tubes, and other high temperature parts. Because it is an inert material, it is both a good thermal conductor and a good electrical insulator.

Zetamix White Zirconia or Zetamix Black Zirconia

Zirconia is a widely used material in the field of technical ceramics. It has an excellent shock and bending resistance. Ideal for creating original pieces in the luxury sector, Zirconia parts can be craft to obtain pieces with beautiful matte, brushed, polished or mirror like finish.

Zetamix SiC Silicon Carbide

Silicon carbide is an extremely hard material, very resistant to wear and thermal shocks. Ideal for advanced applications such as heat exchangers or military applications, it can also be polished for the creation of mirrors for the aerospace industry.
Zetamix SiC is compatible with the ZYYX Pro II MC printer, but needs an extra-high temperature furnace with partial vacuum for sintering.

Metals for ZYYX Pro II MC

Zetamix H13 Tool Steel

H13 steel is commonly used for hot or cold work tooling application and allows the production of a wide variety of tools such as extrusion die or injection mold. Moreover this material has a high level of ductility, thermal and electrical conductivity and resistance to corrosion.

Zetamix 316L Stainless Steel

Stainless steel is a versatile material, making it a prime choice for a wide range of internal tooling applications. More resistant to impact than a ceramic, it also resists corrosion and wear.

Included with ZYYX Pro II MC 3D Printer

Pro II Metal & Ceramic Hood
Pro II MagFlex™ Build-Plate with top layers PA TL, Multi-Material TL, Perforated TL
SwiftTool24™ Carbon hardened tool head 0.4 mm
SwiftTool24™ Carbon hardened tool head 0.6 mm
ZYYX Connect (remote control interface)
Simplify3D license
proTect™ filament storage system
Pro Maintenance Kit
Tool Box
1 kg ZYYX proCarbon filament
1 kg ZYYX PLA filament
1 kg ZYYX Flex95A filament

(Metal & Ceramic solution packages also available)

Pricing and Purchase

You can check the ZYYX Pro II MC 3D Printer package prices and availability in the store:
ZYYX Pro II MC™ 3D Printer kit
ZYYX Pro II™ Basic 3D Printer kit

Shopping cart
Your cart is empty