ZYYX+ or ZYYX Classic build-plate optimized for har to print materials, like ABS and ASA. Uses a different principle, where the raft sticks hard to the holes.
Use a ZYYX spatula to remove the raft from the build-plate. Our new M2.0946 ZYYX stainless steel buildplate spatula scraper is recommended.
ZYYX/ZYYX Classic: Yes
ZYYX Pro: NO (see ZX304 Perforated Build-Plate for ZYYX Pro)
Instructions for Use
Use the designated Profiles for the ZYYX perf board or the following settings:
Z offset: ABS/ASA = +1 mm (print 1 mm closer), other materials = +0.5 mm (print 0.5 mm closer)
Bottom layer raft setting: First layer speed: 30%, Layer 1 temperature: +5-10 C.
Use 3 Raft Base Layers.
Below shows the adjusted z offset setting in Simplify3d for ABS/ASA.