One SwiftTool Multi0.8 for use with non-abrasive filaments like PLA, ABS, ASA, or proNylon™. The Multi0.8 mm is marked by a red cable, so you easily can separate them. Note that because of the bigger opening, this SwiftTool is 4-8 times faster than Multi0.4 when printing the same model.
They can be purchased by themselves or as a kit. The kit you can find here.
There is also an upgraded version that is moulded into Silicone to lessen the material sticking to the hot end and also protect the cable. You find it here (ZX708S).
Note also that these Multi type nozzles never should be used with proCarbon™ or proGlass™.
ZYYX Pro II: NO, se SwiftTool24
ZYYX Pro: all models
ZYYX/ZYYX Classic: NO