Upgrade your ZYYX printer with the ZYYX Connect network module with camera. This allows you to hook up the printer to your Ethernet network to remotely start and stop prints. You can also watch a video of the print process.
Also comes in a version excluding a camera, see ZX606DIY ZYYX Connect (network port upgrade).
The camera is attached to the inside of the printer using magnets, and you fasten the flat cable to the printer walls using included metal tape.
A guide for the installation is included.
ZYYX Pro: all
ZYYX+: all after mid 2016 with 3 square holes in back
Early ZYYX+: with additional mounting box
ZYYX/ZYYX Classic: with additional mounting box
Note: for some printers soldering in a 4-pin connector to the motherboard may be required. The connector is included in the kit.