ZX303 ZYYX Pro™ Standard/PA Build-Plate

79,50 excl. VAT

Description

The ZYYX Pro™ Standard/PA Build-Plate has a premium borosilicate glass base plate laminated with a custom plastic surface made specially for proNylon, proCarbon, and proGlass printing. This build-plate surface allows printing with the ZYYX engineering materials without any need for a heated plate or adding temporary materials to the plate surface.

The build-plate is held in place with three neodymium magnets, making it easy to to first remove the plate from the printer before detaching the prints from the plate.

A ZYYX Pro™ Standard Build-Plate will last for about 6-12 months of normal usage, but usually a lot longer. It will typically work better when it is worn and can be cleaned with Acetone to remove any grease or finger-prints that will deteriorate the adhesion. Never use glue with this build-plate, since that will ruin the plate. If the top surface gets major holes or the glass gets broken the plate should be replaced.

Size: 300 x 250 mm

Printer Compatibility
ZYYX Pro II: Yes, but the ZX313 MagFlex™ PA Spring-Sheet (for nylon based filaments) is recommended.
ZYYX Pro: Yes (see Pro II)
ZYYX+: NO
ZYYX/ZYYX Classic: NO

Shipping info

Weight1,5 kg
Dimensions400,0 × 300,0 × 200 mm
Shopping cart
Your cart is empty