We constantly develop new and improved profiles based on customer feedback and new development of materials and products for our ZYYX 3D Printers.
NOTE It is very important that you are using the correct Simplify 3D profile for your printer model, firmware (and/or SwiftTool) when slicing your files. Otherwise damage can be done to your machine or build-plate, which is not covered by warranty.
ZYYX+ and ZYYX Classic
For these printers it is important that you use the correct profiles for your firmware version.
For example, if your ZYYX+ is running firmware rZX30, you should be using V3 Simplify3D profiles.
If your ZYYX+ runs rZX50 firmware, you should use V5 profiles.
Profiles (V5) compatible for ZYYX+ and ZYYX Classic running firmware rZX50 or rZX52:
Download ZYYX+ V5 Profiles
For older firmware you can install the drivers using the Simplify3D Configuration Assistant. You will find this under the Help menu in Simplify3D.
If you need to update your firmware, please navigate to the FAQ (Firmware section). If you need any assistance please contact ZYYX Support in the form on our support page.
Please note that all files are compressed in ZIP-format and requires 7-zip, or something compatible to unpack these files.
7-zip can be downloaded for free from https://www.7-zip.org/
For OS X you can use https://www.kekaosx.com/en/
For Linux derivatives you can use p7zip, e.g. https://packages.debian.