The ZYYX 3D Printer comes pre-leveled from the factory and will use the auto-leveling function to adjust itself before every print.
If your factory leveling has been altered the printer might display “Your build-plate needs calibration. Please run the leveling script.”
If this happens or you are concerned that the factory leveling has been altered by mistake you can run an assisted factory leveling wizard. To do this you choose UTILITIES->Level Build Plate in the menu system of the printer.
For older ZYYX Pro you will need do download a script for this and “print it”. See Build-Plate Leveling and Tuning below.
You will then be guided through leveling, and asked to turn the leveling knobs under the build-plate platform.
NOTE, the words ‘clockwise’ and ‘counter-clockwise’ in the wizard should be interpreted as the direction of turning when looking at the build-plate from above.